A washing machine is a heavy-duty appliance in your house that can ease your task of washing clothes. It tends to wear or tear and needs repair or replacement with time. After All, it’s a machine and gets stuck with technical parts with a specific expiry date. You should know how to take perfect care of your washing machine. If you are reading this post, you will learn how to drain a washing machine with a step-by-step procedure. A washing machine needs a procedural method for setting up and working perfectly.
If you are facing a problem or issue with your washing machine, follow the below steps to get over it.
Switch off the hoses in the washing machine
The first step is to switch the hoses off if you don’t want to flood your laundry room. You will get the washing machine valves situated near the machine.
Drain the water
You can drain your washing machine by leaving the valves off and turning the washer on to regulate a warm water cycle for 30 seconds. Check the switch of the lid and dial for automatic draining of standing water through the regulator.
Turn the electrical system off
It is best to use these techniques when your washing machine is not draining. You can repair it by prioritising safety by turning the power and water supply off before proceeding further. It will prevent you from electrical shocks, currents and machine floods. There are high chances of catching current easily with water.
Prepare with a large bucket
You should place a shallow bucket, container or tub below the drain hose in your washing machine. Remove the drain hose clamp carefully and hold the hose up to remove all the water to get collected in a large container or tub below. It will not flood your laundry room with water all around.
Detach the drain hose for a complete repair
There are three hoses in a washing machine through which you can drain off the used water and get the hot and cold water from the remaining hoses. You should carefully and cautiously remove the drain hose and place it in a container or tub filled with warm water. It will help you deal with any pipe blockage, and you can remove debris or any other waste easily. You can clean the washing machine drainage pipe and prevent further harm or damage.
Move the machine
You should move your machine forward if it is kept above the wall. Access the panel, and don’t forget to refer to the machine manual. There is a drain pump hose and inlet hose that is directly connected with spring clamps. Remove the excess water for washing machine repair in Brisbane.
Clean washer
After draining all the water from the washing machine, you can take a soft-bristled brush with warm water to clean the washer completely. You can scrub and vacuum the dirt and dust collected in the drain pump filter and drainage system. It is a simple way to use a washing machine drain cleaner. You should clean all the hoses with hot water and cold water.
Contact a professional washing machine repair expert
You can do some of the tasks, but you should take the help of a professional expert to troubleshoot your washing machine properly. They know the best procedure of how to install a washing machine drain hose carefully without any breakage. You will determine the root cause of your IG washing machine not draining. Professionals will also guide you with the most important tips for proper care and maintenance.
