Pianos are wonderful pieces of musical equipment that have served as a source of creativity and motivation for countless generations of classical musicians. If you want to move one of them, the situation is different.
Read more details here.
Before attempting to move a piano by yourself, you should keep in mind that it is a risky task, and you should consider getting assistance instead. Even though the cost of piano removal services is typically quite high, it is strongly suggested that you get in touch with a professional mover if you have any reason to believe that you will not be able to move the piano on your own.
How to relocate a piano by yourself if it’s an upright
Figuring out the dimensions of the upright piano
Start by determining the dimensions of the piano before moving on to anything else. You have to be one hundred percent certain of the specific measurements of the upright piano that you own. Having this information will make it easier for you to carefully plan out the entire process of moving it. The typical dimensions of an upright piano are a height of 110 to 135 centimetres, a width of approximately 150 centimetres, and a depth of approximately 60 centimetres. Take into consideration that these dimensions can vary, and that yours will probably be slightly unique. In general, however, the size ranges from 125 to 150 to 60 centimetres.
Carry on with the procedure for moving.
Take measurements, and then clear the way. To determine whether or not the piano will fit through the door frames, take measurements with a measuring tape or a rope. The path should then be cleared of any obstructions, including carpets, before continuing.
Take down any decorations that are there. The shape of an upright piano, in contrast to that of a grand piano, is one that makes it easier to move around the room and play the instrument.
Wrap the instrument up. To begin, cover the keyboard with tape and then wrap the lid around it just in case. This is done so that the lid will remain in its proper position throughout the ride. You can wrap the remaining portion of the instrument in plastic wrap or a cloth that is large enough to completely envelop it, whichever option you prefer. Tape should be used to seal the package.
Dolly the piano when lifting it. Put on your work gloves, and enlist the assistance of some of your close friends to complete this task. If the weight of a piano is something you’ve never given much thought to, a standard upright piano tips the scales at about 130 kilogrammes. To put that in perspective, a grand piano can weigh up to 500 kg. Lifting an upright piano onto a dolly requires at least three strong pairs of arms to be used simultaneously (and at least six for a grand piano). While professionals use electronic devices that make the process simple, risk-free, and require little to no physical effort.
Dolly straps should be used to properly secure the piano.
Utilize the dolly to push.
Install a ramp for use with the van. Pulling and pushing the piano into the van at the same time is the correct way to load it. Make use of the lifting straps for this, and exercise extreme caution when standing behind it; the weight of the piano is sufficient to either crush you or at the very least cause a minor injury if you are not sufficiently careful.
Put the piano in the back of the van and lock it. It is recommended that the piano be positioned against the rear wall of the van, with a substantial amount of other items in front of it. You can use the furniture to block access to it.
Instructions for moving a grand piano
Moving a grand piano can be accomplished in a variety of ways. This is just one of many methods that can be used to accomplish the task without risk and in an effective manner. The video that is embedded below also demonstrates how to do it step by step:
To keep the keyboard cover securely closed, stuff tissue paper into each end of the cover.
If it is possible to do so, remove the keyboard cover and wrap the device in a soft fabric for additional protection.
First, remove the lid hinge pins with extreme caution, and then unscrew the plate that holds the pins using the screws provided.
After ensuring that nothing is holding the lid in place, carefully lift it away from the piano so that it does not slide or rub against the instrument. Put it away and carefully wrap it in order to prevent it from getting scratched while it’s being transported.
Determine which of the piano legs is numbered 1, then take it out of the piano. Place the piano carefully so that the cover of the board rests on a thick and pliable tissue that has been previously spread out on the floor at the side of leg 1.
Maintain this position for the duration of the removal of the remaining legs from the grand piano by another person.
Each of the three legs should have their own padding.
Moving blankets should be used to cover the entire piano.
Continue placing the piano into the van as instructed. You are able to use the lift if it is large enough and the musical instrument is located on a higher floor of the building where the property is located. In that case, you’ll need at least three movers to help you bring the piano down the flight of stairs.
First, line the floor of the back of the van with moving blankets, and then place the piano on top of those.
Contact us to learn more.
